Tube ice machine

Exceptional Features

  • Compact design, simple configuration, easy to operate.
  • Design and manufacture in accordance with HACCP/FDA standards. The stone forming surface is made of 304 stainless steel.
  • The machine has a fast, safe and clean ice making speed.
  • Stable performance, famous imported compressor.
  • The noise of the pure ice cube machine is low and the cold is strong.
  • Automatic control system.
  • Water is cleaned by sterilization technology to help pure ice cubes, meeting food hygiene and safety requirements.
  • Maximize energy savings.

Description

  • Design and manufacture in accordance with HACCP standards. The stone forming surface is made of 304 stainless steel.
  • The machine has a fast, safe and clean ice making speed.
  • Stable performance, famous imported compressor.
  • The noise of the pure ice cube machine is low and the cold is strong.
  • Automatic control system.
  • The water is cleaned by sterilization technology to keep the ice pure.
  • Maximum power saving, easy operation.

Technical details

  • Ice making pipes, water troughs and related contact details in the ice making process are all made of 304 stainless steel.
  • The stone cutter is made of special stainless steel, heat treated to achieve the required hardness after machining.
  • The reinforced frame to install the ice machine is made of steel coated with anti-rust paint.
  • Insulated with PU foam, outside covered with SUS304 stainless steel.
  • Designed and installed automatic protection devices for overload, overcurrent, knife jam, safety during operation.
  • Fully fabricated and assembled at the factory, convenient for transportation and installation at the site.

Working principle

The ice machine system operates in 2 processes including:

  • Ice making process: Ice is pumped to the water tank above the ice machine and flows inside the ice tubes (heat exchanger tubes), the very low temperature refrigerant outside the ice tube transfers heat indirectly through the pipe wall. . The water gradually recrystallized into ice inside the tube until completely solidified and adhered to the wall of the tube.
  • Defrost process: At this time, to separate the ice from the tube, people increase the temperature of the medium outside the ice tube, the contact surface between the ice tube and the pipe wall will melt and fall down thanks to gravity. At the same time, the stone cutter is operated to cut the ice into small pieces and bring it out through the discharge throat. At the end of the freezing process, the system continues to cool the refrigerant to make ice, so that the ice making process is carried out cyclically and continuously.

Specifications

Specifications:

  • Inlet water temperature: +5o
  • Refrigerant evaporator temperature: -15o
  • Translation method: direct secretion.
  • Refrigerant: gas NH3 or R22.

Thông số máy đá viên tiêu chuẩn của SAREE chế tạo:

Model Unit SA-ĐVI-10 SA-ĐVI-15 SA-ĐVI-20
Ice forming capacity Kg/24hours 10 15 20
Compressor capacity KW 45 60 75
Ice machine length (L) mm 1800 2100 2100
Ice machine width (W) mm 1800 2100 2100
Ice machine height (H) mm 5500 5500 6500
Voltage 3Phase/380V/50Hz

Reviews

There are no reviews yet.

Be the first to review “Máy làm đá viên (đá ống)”

Your email address will not be published.